Got the manifold on today. Wonder of wonder it clears the stock turbo,

I had them all faced off both top and back.  You will have to cut off
part of the flange and drill the mounting holes depending on the year
of your engine. More about that soon.

I am ready to ship the manifold.
Price for the manifold alone is $160 plus $15 shipping in the lower
48. Overseas, Alaska and Hawaii  depends.

Send a check for $175 if you want one to:

Paul Lamar
830 East Santa Maria St.
Suite 303
Santa Paula Calif.
93060

Price will go up later when we go into general distribution.

Still need to do some machining on
the injector holder runners. Ernseto if you could come next week we
can finish those off. More about that shortly.

Paul Lamar

Paul,

Would you put my name on your list for one of the manifolds if some remain
to be sold?  I'm what you'd consider a lurker, taking in all the info on
this list and convinced that a rotary is the way to go.  I don't have an
engine yet but I figure I can put the manifold on the shelf next to Butch's
Wiggins couplings I got awhile back and just admire the workmanship for now!

If you let me know one is available for me, I'll send the check promptly.

Thanks, and thanks for all the work you do in running this list and
especially now for designing and producing this manifold.

Bill Garrett
Pottstown, PA

As far as I know we still have some slots in the first batch of ten.
They will go out in the order of the checks recieved.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.