I talked with Ron at Spintech about a group buy of 2 into 1 cruiser

mufflers fabricated from
 > >> 321 stainless.

If you are thinking of not collecting the headers before the muffler you will
be leaving a bunch of power on the table.

Lynn E. Hanover

I agree. As one pulse travels through the collector it's inertia
cause a low pressure pulse in the other pipe which of course
increases the exhaust flow out of the other rotor 180 degrees
out of phase.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.