Here is the one pulse scan.
The left side of the graph is the opening of the exhaust
port and the right side is the closing of the exhaust
port. In a rotary this takes 180 degrees of e-shaft rotation.
The BDC and TDC numbers in this graph is for a piston
engine so ignore those numbers.
As far as power is concerned the area under the curve
above the atmospheric line is a determent. The area above the curve
below the atmospheric line is a help. The difference is proportional
to the HP improvement. If the sum of the areas is negative it is an
improvement and if the sum of the areas is positive it hurts the HP.
A collector system will move the curves downward relative
to the atmospheric line helping the HP generation.
The dotted curve is the beginning of a second wave bounce.
This could help if the RPM was raised slightly in this case.
I'll talk more about that shortly.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.