Subject: 13B turbo or 20B
From: ACRE NL
Date: 2/11/2003, 10:18 AM


 > > Paul and group,
 >
 > This is my first post.  I am still debating which rotary I need to install
 > in my Standard Velocity project (hey, I just graduated from IF I install a
 > rotary to WHICH rotary. Wahoo).  The 13b turbo or the 20b NA. Is the 13b
 > powerful enough to give 200mph cruise....is the 20b overkill????
 aaaaggghhh.
 >
 > However, the reason for my post is that regardless of what I do and your
 > superior knowledge on this topic, you have forever endeared yourself to me
 > with your wonderful statement...and I quote "the silly commie tax policy."
 > Yep, that about sums it up.  FWIW.
 >
 > All the best,
 >
 > Chris Barber
 > Houston
 > www.LoneStarVelocity.com
 >
 > Christopher Barber
 > Attorney and Counselor at Law
 > 11930 S Sam Houston Pkwy E
 > Suite 103
 > Houston, Texas 770894755
 > 281-464-LAWS (5297)
 > 281-754-4168 (fax)
 >
 > CBarber@TexasAttorney.net
 > www.TexasAttorney.net


 I think the 13B turbo will do the job. I am counting on 200 MPH cruuse
 at 12K to 18K feet.

 I lean towards the turbo because I like to go high for long cross countries.
 Of course a 20B turbo would be even better :) My airplane (Kis Cruiser)
 weight and balance would not accommodate a 20B turbo.

 Paul Lamar

Christopher Barber wrote:

 Paul,

 Thanks for the reply.  The W&B (esp. for the 20b) is an issue with the
 Velocity too, but several builders have overcome it (really don't want a
 pusher being tail heavy <g>).  Some have mentioned that the 200hp may not
 quite be enough, but the Velocity can work with as little a 160hp and
 Velocity, Inc suggest the Lycoming 360 at 180hp or 200hp or the Franklin at
 220hp.  If I knew I could get 200+, maybe even 220 consistently, the 13b
 would be swell.  The 20b has been used in the Velocity XL successfully and
 its requirement is a Lyc. 540 at 260 or 300.  But it has also be used in the
 Smaller craft as well (mine is the smaller. My main concern on a 20b is
 finding one I can rebuild.  I found a couple  that were already rebuilt,
 but, as a learning tool (and to spread out the cost) to expand from my Ford
 289 engine experience, my "other" car is a 65 Mustang Ragtop, I would like
 to rebuild....can't think of a better way to get intimate with an unknown
 technology.  I don't need the engine for a while, my Velo is on it's gear
 with the top on and I am working on the doors....but I don't even have wings
 yet.  The engine rebuild would be a project directly related to the
 Velocity, but not as itchy.

 Thanks again.

 All the best,

 Chris

 Christopher Barber
 Attorney and Counselor at Law
 11930 S Sam Houston Pkwy E
 Suite 103
 Houston, Texas 77089-4755
 281-464-LAWS (5297)
 281-754-4168 (Fax)

 CBarber@TexasAttorney.net
 www.TexasAttorney.net--

Keep checking. It is a fascinating engine to take apart and overhaul.
You can sometimes find a good 13B core for as little as $300.
I have not tried recently however. (Maybe us aircraft users have dried up
the supply of used engines :))

Anybody have a 13B core they are willing to part with?

Paul Lamar

Two RX7s in the local wrecking yard.  One has a 12A  they say still
runs.  The other is a 13-B, condition unknown.  The car was wrecked
but no obvious engine damage.   I think either of them can be had for
$300/$350.    Jerry

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.