Subject: 13B turbo or 20B
From: ACRE NL
Date: 2/11/2003, 10:21 AM


Paul and group,

This is my first post.  I am still debating which rotary I need to
install
in my Standard Velocity project (hey, I just graduated from IF I
install a
rotary to WHICH rotary. Wahoo).  The 13b turbo or the 20b NA. Is the 13b
powerful enough to give 200mph cruise....is the 20b overkill????
aaaaggghhh.

However, the reason for my post is that regardless of what I do and your
superior knowledge on this topic, you have forever endeared yourself
to me
with your wonderful statement...and I quote "the silly commie tax
policy."
Yep, that about sums it up.  FWIW.

All the best,

Chris Barber
Houston
www.LoneStarVelocity.com

Christopher Barber
Attorney and Counselor at Law
11930 S Sam Houston Pkwy E
Suite 103
Houston, Texas 770894755
281-464-LAWS (5297)
281-754-4168 (fax)

CBarber@TexasAttorney.net
www.TexasAttorney.net


I think the 13B turbo will do the job. I am counting on 200 MPH cruuse
at 12K to 18K feet.

I lean towards the turbo because I like to go high for long cross
countries.
Of course a 20B turbo would be even better :) My airplane (Kis Cruiser)
weight and balance would not accommodate a 20B turbo.

Paul Lamar

Christopher Barber wrote:

Paul,

Thanks for the reply.  The W&B (esp. for the 20b) is an issue with the
Velocity too, but several builders have overcome it (really don't want a
pusher being tail heavy <g>).  Some have mentioned that the 200hp may not
quite be enough, but the Velocity can work with as little a 160hp and
Velocity, Inc suggest the Lycoming 360 at 180hp or 200hp or the Franklin at
220hp.  If I knew I could get 200+, maybe even 220 consistently, the 13b
would be swell.  The 20b has been used in the Velocity XL successfully and
its requirement is a Lyc. 540 at 260 or 300.  But it has also be used
in the
Smaller craft as well (mine is the smaller. My main concern on a 20b is
finding one I can rebuild.  I found a couple  that were already rebuilt,
but, as a learning tool (and to spread out the cost) to expand from my Ford
289 engine experience, my "other" car is a 65 Mustang Ragtop, I would like
to rebuild....can't think of a better way to get intimate with an unknown
technology.  I don't need the engine for a while, my Velo is on it's gear
with the top on and I am working on the doors....but I don't even have
wings
yet.  The engine rebuild would be a project directly related to the
Velocity, but not as itchy.

Thanks again.

All the best,

Chris

Christopher Barber
Attorney and Counselor at Law
11930 S Sam Houston Pkwy E
Suite 103
Houston, Texas 77089-4755
281-464-LAWS (5297)
281-754-4168 (Fax)

CBarber@TexasAttorney.net
www.TexasAttorney.net--


Keep checking. It is a fascinating engine to take apart and overhaul.
You can sometimes find a good 13B core for as little as $300.
I have not tried recently however. (Maybe us aircraft users have dried up
the supply of used engines :))

Anybody have a 13B core they are willing to part with?

Paul Lamar


Chris,

I'll try to explain why I chose the 20B over the 13B for my Lancair ES.

First, I liked the idea of having the extra rotor.  Since each rotor has
three separate combustion chambers working at all times, this is like
getting three extra cylinders.  In case something happens to one of the
rotors, (coil failure, broken apex seal, etc.)  I would still have two left
to get me down safely.  As for the weight, the "Super" ES is made for the
IO-550, so the extra weight of the 3-rotor should not be a
problem.  Besides, a n/a 20B should weigh about the same as a turbo 13B,
and produce about the same hp, maybe more depending on porting, etc.  And
if you feel you need more hp, you can always turbo-charge it, with an added
weight penalty of course.

Something else that I saw as a benefit is that the 13B has a power pulse
every 180 degrees of crankshaft rotation whereas the 20B fires every 120
degrees.  In other words, the 20B has three power pulses for every 360
degrees of crank rotation whereas the 13B has two.  After the 2.17:1
re-drive, the prop sees a power pulse about every 55 degrees with the
3-rotor.  Although the 13B is already very smooth, this should make for an
even smoother running installation.

Finally, (personal preference) I like the exhaust tone better.  ;-)

If you want to drive up to Austin, I have a 13b apart in the corner of my
garage.  You're welcome to play with the pieces.

Mark S.
Austin, TX


The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.