Subject: 13B turbo or 20B
From: ACRE NL
Date: 2/12/2003, 1:46 AM


Paul and group,

This is my first post.  I am still debating which rotary I need to
install
in my Standard Velocity project (hey, I just graduated from IF I
install a
rotary to WHICH rotary. Wahoo).  The 13b turbo or the 20b NA. Is the
13b
powerful enough to give 200mph cruise....is the 20b overkill????
aaaaggghhh.

However, the reason for my post is that regardless of what I do and
your
superior knowledge on this topic, you have forever endeared yourself
to me
with your wonderful statement...and I quote "the silly commie tax
policy."
Yep, that about sums it up.  FWIW.

All the best,

Chris Barber
Houston
www.LoneStarVelocity.com

Christopher Barber
Attorney and Counselor at Law
11930 S Sam Houston Pkwy E
Suite 103
Houston, Texas 770894755
281-464-LAWS (5297)
281-754-4168 (fax)

CBarber@TexasAttorney.net
www.TexasAttorney.net


I think the 13B turbo will do the job. I am counting on 200 MPH cruuse
at 12K to 18K feet.

I lean towards the turbo because I like to go high for long cross
countries.
Of course a 20B turbo would be even better :) My airplane (Kis Cruiser)
weight and balance would not accommodate a 20B turbo.

Paul Lamar


Christopher Barber wrote:

Paul,

Thanks for the reply.  The W&B (esp. for the 20b) is an issue with the
Velocity too, but several builders have overcome it (really don't want a
pusher being tail heavy <g>).  Some have mentioned that the 200hp may
not
quite be enough, but the Velocity can work with as little a 160hp and
Velocity, Inc suggest the Lycoming 360 at 180hp or 200hp or the Franklin
at
220hp.  If I knew I could get 200+, maybe even 220 consistently, the 13b
would be swell.  The 20b has been used in the Velocity XL successfully
and
its requirement is a Lyc. 540 at 260 or 300.  But it has also be used in
the
Smaller craft as well (mine is the smaller. My main concern on a 20b is
finding one I can rebuild.  I found a couple  that were already rebuilt,
but, as a learning tool (and to spread out the cost) to expand from my
Ford
289 engine experience, my "other" car is a 65 Mustang Ragtop, I would
like
to rebuild....can't think of a better way to get intimate with an
unknown
technology.  I don't need the engine for a while, my Velo is on it's
gear
with the top on and I am working on the doors....but I don't even have
wings
yet.  The engine rebuild would be a project directly related to the
Velocity, but not as itchy.

Thanks again.

All the best,

Chris

Christopher Barber
Attorney and Counselor at Law
11930 S Sam Houston Pkwy E
Suite 103
Houston, Texas 77089-4755
281-464-LAWS (5297)
281-754-4168 (Fax)

CBarber@TexasAttorney.net
www.TexasAttorney.net--


Keep checking. It is a fascinating engine to take apart and overhaul.
You can sometimes find a good 13B core for as little as $300.
I have not tried recently however. (Maybe us aircraft users have dried up
the supply of used engines :))

Anybody have a 13B core they are willing to part with?

Paul Lamar

Chris,
Have you researched the spare parts costs.
With a mix of some new and some good 2nd hand parts, it shouldn't work out
too expensive and bottom line is you get exactly what you want.
A good core is sometimes hard to get!
George (down under)

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.