Paul and group,
This is my first post. I am still debating which rotary I need to
install
in my Standard Velocity project (hey, I just graduated from IF I
install a
rotary to WHICH rotary. Wahoo). The 13b turbo or the 20b NA. Is the
13b
powerful enough to give 200mph cruise....is the 20b overkill????
aaaaggghhh.
However, the reason for my post is that regardless of what I do and
your
superior knowledge on this topic, you have forever endeared yourself to
me
with your wonderful statement...and I quote "the silly commie tax
policy."
Yep, that about sums it up. FWIW.
All the best,
Chris Barber
Houston
www.LoneStarVelocity.com
Christopher Barber
Attorney and Counselor at Law
11930 S Sam Houston Pkwy E
Suite 103
Houston, Texas 770894755
281-464-LAWS (5297)
281-754-4168 (fax)
CBarber@TexasAttorney.net
www.TexasAttorney.net
I think the 13B turbo will do the job. I am counting on 200 MPH cruise
at 12K to 18K feet.
I lean towards the turbo because I like to go high for long cross
countries.
Of course a 20B turbo would be even better :) My airplane (Kis Cruiser)
weight and balance would not accommodate a 20B turbo.
Paul Lamar
Christopher Barber wrote:
Paul,
Thanks for the reply. The W&B (esp. for the 20b) is an issue with the
Velocity too, but several builders have overcome it (really don't want a
pusher being tail heavy <g>). Some have mentioned that the 200hp may not
quite be enough, but the Velocity can work with as little a 160hp and
Velocity, Inc suggest the Lycoming 360 at 180hp or 200hp or the Franklin
at
220hp. If I knew I could get 200+, maybe even 220 consistently, the 13b
would be swell. The 20b has been used in the Velocity XL successfully
and
its requirement is a Lyc. 540 at 260 or 300. But it has also be used in
the
Smaller craft as well (mine is the smaller. My main concern on a 20b is
finding one I can rebuild. I found a couple that were already rebuilt,
but, as a learning tool (and to spread out the cost) to expand from my
Ford
289 engine experience, my "other" car is a 65 Mustang Ragtop, I would
like
to rebuild....can't think of a better way to get intimate with an unknown
technology. I don't need the engine for a while, my Velo is on it's gear
with the top on and I am working on the doors....but I don't even have
wings
yet. The engine rebuild would be a project directly related to the
Velocity, but not as itchy.
Thanks again.
All the best,
Chris
Christopher Barber
Attorney and Counselor at Law
11930 S Sam Houston Pkwy E
Suite 103
Houston, Texas 77089-4755
281-464-LAWS (5297)
281-754-4168 (Fax)
CBarber@TexasAttorney.net
www.TexasAttorney.net--
Keep checking. It is a fascinating engine to take apart and overhaul.
You can sometimes find a good 13B core for as little as $300.
I have not tried recently however. (Maybe us aircraft users have dried up
the supply of used engines :))
Anybody have a 13B core they are willing to part with?
Paul Lamar
Jeremy Solomon wrote:
It happens that I have a disassembled 13B NA from a 1988 GTU (GSU? I don't
remember now) It was running fine when I removed it with less than 100K
miles. I planned to install it in a cozy or aerocanard but came into enough
bucks for a velocity XL whose wings are now under construction. I plan a NA
20B when the time comes, in about a million years. The parts include most
of the associated parts, intake etc. Pay shipping and it's yours. It's
taking up space in my shop. If you want pics, I will have to send glossies
by snailmail as I am something of a luddite in the computer department.
DON'T SEND Email to me on this :)
"Jeremy Solomon" <jeremy.solomon4@gte.net>
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.