Dan Ruggirello wrote:

Paul,
Earlier Jerry mentioned that the motor mount plate will not accomodate a
turbo.  Are you using his 24" MM plate?

Dan

I am using Jerry's plate but it is 29 inches center to center rubber bushings
for the turbo and internal (under the cowl)  muffler clearance.
Jerry should make one for you if you ask him nicely :)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.