Ed how much clearance is there between input shaft and
excentric
shaft? I
was told by Ross it should be between .020 and .040 which should
not
be enough
to allow 1/4 of the sun gear to not mesh with the pinion gears. It
looks like
the incomplete mesh is part of the problem . If you add possible
misalignment
along with the inadequate lube system it looks like a common 2.17
problem.
An input shaft thrust brg would fix the mesh problem and
several
have come
up with lube system mods to direct lube to the sun and pinion
gears
but as
Paul says, a possible misalignment problem is somewhat more
difficult.
IMHO
Kelly Troyer
On second thought yopu might be able to machine the teeth out and tig
weld
in an insert and recut the teeth. Tracy might sell you an early RD1
part
(not six pinion) with the teeth already machined that you can cut down
and weld in. How's the ring gear look? If that proves to be the
problem.
Paul Lamar
Thanks Kelly, Paul
Sounds like too many problems for a home workshop to tackle. Paul,
the
ring gear teeth looked perfect. No signs of stress, no galling. I'll
check
with Tracy and See if an early RD1 part might replace the sun gear
shaft.
While I agree that one pinion gear having the same galling pattern would
indicate an alignment problem, its interesting that I have 256 hours on
the
gear box and the last time I checked the gear was around 80 hours ago
when I
put in the additional oil drain on the top rear of the gear housing,
which
makes me think that perhaps lubrication had some role in the galling.
But,
I guess its a moot point, since I won't fly with it in that condition.
Ed
Assuming for the moment that it was triggered by a lube problem. What
that
says to me is the planetary gear set is so over designed for our purposes
that just
one planet gear out of the four is almost adequate :)
Paul Lamar
Given that one of the pinion gears appeared to be carrying most of the load,
I am inclinded to agree.
Ed
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.