Subject: Plugging the injector holes
From: ACRE NL
Date: 2/19/2003, 1:13 AM

Al Gietzen wrote:

What is a good way to plug the the two primary injector holes in the
center housing.
I do not want any fuel on the hot side of the engine.
I think Tracy mentionned how to do that once but I forgot.

Would be a shame not to utilize these injectors.  Not only are they
important for good starting and running at lower rpm, but offer a good
option for redundancy.  If you have fuel leak (vapors) and an ignition
source, it's not going to matter much where your injectors are.

Al

I strongly disagree Al. Aircraft engines rarely explode from
vapors. The same goes for auto engine installations.
Fuel fires on the other hand are all too common.

Why put the leak next to the ignition source?

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.