Perry Mick wrote:

It is about one inch and I did draw it to scale, but from memory. Strake
is about 10" thick. Inlet opening is 5" x 5".

Still need the horizontal distance from the opening to the leading edge of

the strake.

Very important to see if the P51 type boundary layer bypass is working.
Also the airflow over the top of the strake should be included.

Paul Lamar

Perry,

Always interested in your set-up and from the drawing profile it looks
perfect. At first I thought it might be a boundary layer problem, but when
you said Inlet opening of
5 x 5; that seems way too small to me. Shouldn't it be something like 20 x 5
!?
George (down under)

Its for a narrow oil cooler mounted the long way George.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.