I see a simple product here; (2) machined aluminum plugs with o-rings,

small

plate secured by two screws above it.
...Chrissi

Yep. That will work.

Paul Lamar

Racing Beat makes & sells them.  Expensive solution, but looks
"professional".  If I were not going to use the stock primary injector
mounts I'd use the simpler, cheaper, lower profile & lighter methods Paul
and others suggested.

Tracy

Thanks Tracy, I was just considering our engine is assembled, don't like chips and things around
it.
...Chrissi

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.