Subject: 88 turbo on Ebay.
From: ACRE NL
Date: 2/23/2003, 11:43 PM


While I got you on the line Chris. Did you get that 88 engine off Ebay?

Paul Lamar

No, upon your comments, I bowed out.  It finally sold for about $1100.00.  I
was the high bidder for quite a while, but I emailed my proxy bid amount to
one of the other bidders and was relieved when he won.

So, now I am doing serious late night net surfing to determine the best
route to get a 13b to consistently do 200+ hp (w/o turbo) for the use in my
Standard Velocity project. Several sources told me this should not be that
big an issue, also, the weight savings over the 20b in my smaller Velocity
should be a positive.  I spoke with Bruce Turintine (sp?) on Friday and he
said his "standard" aviation 13b should be at about 193 hp.

If you check out my newly updated website (as in, updated tonight)
www.LoneStarVelocity.com , you will see I am far from needing the
engine...but I am really enjoying the process of learning about this engine.
I have also ordered a engine mount from Conversion Concepts....so, it is no
longer an IF thing, I have actually committed to something <g>. I am happy
these mounts became available. Even with all the auto projects (restoring
65/6 Mustang ragtops) I have had over the years, to my surprise, I have not
yet learned to weld, thus fabricating a mount from scratch did not appeal to
me. Actually, seeing the mounts offered may have been what "kicked" me over
the auto conversion hump...that being my major perceived hurdle.

Your thoughts and insight are greatly appreciated...feel free to make any
and all....and never worry that they are unsolicited.

Finally, I placed a couple of links to your page on my site.  I hope you do
not mind, if you do, let me know and I will, of course, remove them.  Thanks
again.

All the best,

Chris
Houston

I am relieved. $1100 is too much for an 88 turbo engine. The turbo and manifold
are near worthless. Almost all are cracked. Now if it were a 89 to 92 that is another 
matter entirely. The turbo and manifold alone are worth $250 to $500 if they are 
not cracked. Only a few crack. What had me fooled was the J spec. I assumed
it was a post 93 engine and they are worth good money. The post 93 sequential 
turbo's can and should be sold as they are unsuitable for aircraft use
but make fine car turbo's..

No I don't mind about the links.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.