Subject: Failure modes- - - detonation
From: ACRE NL
Date: 2/23/2003, 12:21 PM


Only the turbo is affected by this problem. The NA engine rarely detonates.
 >With the turbo use 3 mm Hurley Engineering  two piece steel apex seals.
 >The 2 mm  three piece cast iron seals were developed by Mazda to improve
 >the low RPM/low HP fuel consumption and emission problem. They have no
 >benefits at high RPM and high power in a turbo engine. The two piece
 >steel apex seals are much more rugged and less prone to fracture
 >under detonation.

My engine is NA but what if I were to install nitrous ? Would that make it behave more like a
turbo as far as detonation goes? It's got the turbo rotors.
Brian Trubee

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.