$50 each plus $15 shipping for up to four at a time.
 Lots more machining on these than on the manifold.
 Sorry about the bad pics. My camera had sanding dust
 on the lens :) will fit both Mazda (Nippon Denso)
 and Lucus injectors. Also I think Bosch but I am not
 sure because I don't have one.

 Send checks to me at:


 830 East Santa Maria St.
 Suite #303 <<<<<< very important.
 Santa Paula CA
 93060

 Paul Lamar

Paul,
I will take four, putting check in mail today.

The picture did not come through for some reason.

Bill Schertz
KIS Cruiser #4045

OK Bill.
There were two pictures. I do believe there is some message size limit set
somewhere on your end. Here is one of the pictures. Please let me know
if you receive this one.

Did anybody else miss receiving two pictures with the above message?

Paul Lamar

Paul, do you use the Mazda injector diffusers in these runners.
IF yes, do you use the primary or the secondary injector diffusers.

Thanks

Rino

No injector diffusers. My thinking on this is they are not needed.
The fuel should have plenty of time to vaporize. More injectors
are coming on the market that claim a finer spray pattern. Lucas
is one of them.
 
Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.