keltro@att.net wrote:

Snip
AN> Looking good Don. If that does not look like your average Mustang II
AN> it is because Don built a female mold and laid up a carbon fiber roof with
AN> gull wing doors. Is that a stock smog pump I see on the right
AN> side of the engine for the vacuum instruments Don?

AN> Paul Lamar

Paul that is the water pump on the right, The pump is a self contained
Toyota pump that delivers about 20% more than the stock N.B..
It is also much lighter and puts the pump down low allowing maw to put
a header tank high on the firewall. The original pump would have had
no head and any loss of water would of had it sucking air.

--
Best regards,
 ddunbar

        Don,

         Very interesting! Would you care to share more photos and info on
  which Toyota pump you are using and also how you are plumbing the inlet
  and outlet to the 13B. The fact that a lower pump position would be desirable
  for A/C installatiions has been discussed before.

        Kelly Troyer

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.