Looks feasible Jerry. Dual injectors on a 1.75 ID
runner with a 2.025 OD. Trick was to tilt them down slightly.

This will make a one piece fuel rail feasible with four injectors.

When you get going on this we can do a pattern and have a few
castings made. Price will be a bit higher as I don't
anticipate a high  demand.

--
Paul Lamar

Paul,  I neglected to say that I want two of the injector runners.  I
hope this is something you can do soon. Having the injector runners is
a major piece of the puzzle.    I predict that p-ports, simple,  light
and  powerful, will become the set up of choice as soon as they are
available.  You will sell a bunch of these eventually.    Thanks.
Jerry

In the over all scheme of things It has got to be low priority.
I need to get another bunch of manifolds done first plus the dyno.
I think you would be better off welding them up for the
foreseeable.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.