> > The price on the custom intake pipe bends with one 2 inch leg
 > > and one 5 inch leg will be $24 each plus shipping.
 > >
 > > I have ordered them and will keep them in stock for awhile.
 > >
 > > Paul Lamar

 Bulent Aliev wrote:
 >
 > $24 for each bend, or for all?
 > Bulent

 Each. Can you get a better price down there? I'll cancel the order.

 Paul Lamar

Paul,
that is almost the price of Aluminum Bends in .065 from Burns Stainless, and
you can cut off the excess. Paying $24 for pipe and the extra weight doesn't
seem worth it.

Bill Schertz
KIS Cruiser #4045

Yes. About $30 but the Burns bends have 4 inch legs and they are not heat treated.
Burns recommends heat treating them. The equivalent tubing sizes are about 1-7/8
and 1-5/8th.

If any body can come up with a cheaper price I will cancel the order.
Delivery is two weeks after I send them the check.

Pipe is easier to tig weld than thinner tubing.

Paul Lamar

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.