| Subject: Thermal Pellet in Eccentric Shaft |
| From: ACRE NL |
| Date: 2/26/2003, 8:50 AM |
OK Mark, here's the measurements on the spacers. Use .400" if using the stock pulley and .600" if using the aftermarket part. Tracy Crook tcrook@rotaryaviation.com www.rotaryaviation.comThanks Tracy, I have updated that page with the dimensions. http://members.aon.at/wrathall/rotary/
The AirCraft Rotary Engine NewsLetter. Powered by Linux. ACRE NL web site. http://home.earthlink.net/~rotaryeng/ Copyright 1998-2002 All world wide rights reserved.