Paul,
Several aftermarket companies make thermostat outlets that are a flange that
hold down a positionable hose outlet that is either flanged for hose or
threaded, giving you many options on direction and coupling. These are sealed
in place with an o-ring as you clamp them down. If the casting you did was an
adaptor plate you could attach two of the above and give unlimited options as
to coupling and direction.
...Chrissi
I am not following you here Chrissi. I need a drawing or a pic.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.