Subject: another pic - perry2 results
From: ACRE NL
Date: 2/26/2003, 9:10 PM


Russell Kent wrote:

Dan,
Can you tweak the layout of Perry's situation to look like this and then
re-run the
simulation?

Russell

That outlet duct is a no no Russell. Extensive work has been done on
heat exchanger outlet ducts and all recommend a straight sections before
trying
to turn the flow. Have at it if you wish. No harm in confirming what
has already been done many times before. If the CFD does not show
a problem there is something wrong with the CFD.

Paul Lamar

 Dan Ruggirello wrote:

Why not.  Lets have a go at it!  But, I don't understand what you mean,
Paul, by a straight section prior to turning the flow. Do you mean that the
outlet duct narrows to the left of the heat exchanger?  How about an exit
like this instead?  I think what Russell is after is to turn the radiator
more head on into the flow, right?  If so, it seems like the heat exchanger
would offer less resistance to flow in this configuration.

I spoke with the developers and compilations for unix and linux should be
easy to do.  And of course the nt executable is already compiled.  The
software was not written for parallel processing and he said it would be
difficult to implement for their algorithm.  Bummer.

I have been looking into other cfd codes.  There is one written under
nasa/dod grants called NPARC WIND and is free and I believe is capable of
parallel processing and 3D.  The only problem is that access to it for
individual experimenters like myself is a bit difficult.  Apparently it is
only available to "U.S. owned companies, public and private universities,
and government agencies"  and you need to get an export control number for
non-government agencies.  It does piss me off that I pay for the
development, then I can't use it.  (Just like stinger missiles - I payed for
them, so I should be able to purchase one for fun, right ? ;-)  I don't have
a company set up, I guess that would be my next step.

Dan

K&M did some work and they came up with this graph.

Russell Might be able to get that code through his employer.

I'll upload your suggestion next.

Paul Lamar

Yes. That should work fine. Well worth doing.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.