My hangar buddy Steve Wolpin owner of a nice Long Eze turned
me on to this stuff. It is the greatest thing for filling
the rough stuff and super easy to use. Bake it at
140 F for 30 minutes using a heat lamp. It will air harden
if the temp is over 75 F.

Water based gray primer.  Dupont 210 S
When you get it there is a bunch of thick goop in the bottom
of the can. I used a bent welding rod in my drill press
to mix it. Other wise it will take you a half hour.

Converted me from a reluctant and apprehensive world class 
composite klutz to an air show winner........ 

I'm exaggerating of course :)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.