Subject: New 13B project ready for flight!
From: ACRE NL
Date: 3/1/2003, 7:22 AM


      Paul,

      The first 13B powered "Dyke Delta" project to receive its
airworthiness
certificate is ready for flight tests.



<http://www.eaa.org/homebuilders/list/Dyke%20Delta_La%20Beau.asp#topofpage>

      Kelly Troyer


Hey congratulations Kelly.

Paul Lamar

Great going, Kelly! Congratulations guy.

    Test plan? Ground crew? I put a red marker on my airspeed indictator
below which I would not allow the airspeed to decrease below (until
ready
for touch down) .  A number of folks advocate leaving pattern and
climbing
to altitude to do stall test on first flight.  I personnally stayed in
the
pattern and was glad I had when the oil temp went way over redline.
Since
you probably will have not calibrated your air speed indicator, its
fairly
important to mentally note your lift off speed and then I would add 10
mph
as my minimum in flight for the first flight.  FWIW

Ed Anderson


I guess we are both ass's..... as in assume Ed :)>

Paul Lamar


Looks that way, Paul {:>)
Well, I guess than means I can't talk Kelly into flying his Delta to Sun &
Fun 2003 then.
By the way, got Tracy's redrive in  Thursday and finally got the Ross off.
So will be installing Tracy's this next week.  If no unexpected surprises, I
should be ready and have my 5 hours flown off in plenty of time for Sun &
Fun.

Ed Andrson
Ed

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.