Paul
Here is a picture of the manifold on the engine, after I cut off the excess 
on the bottom, and drilled the holes for the bolts. 

Bill Schertz
KIS Cruiser #4045

Looking good Bill. Thanks for the pic.

BTW Peter G, I put you back on the list so you can get a feel for
what is happening. Let me know if it is too much.
 
Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.