Paul
Here is a picture of the manifold on the engine, after I cut off the
excess
on the bottom, and drilled the holes for the bolts.

Bill Schertz
KIS Cruiser #4045

Looking good Bill. Thanks for the pic.

BTW Peter G, I put you back on the list so you can get a feel for
what is happening. Let me know if it is too much.

Paul Lamar

A beautiful job all the way around, Bill.  I always look forward to
your pictures.  My eye caught the motor mount tube to firewall fitting.
If you get a chance I would appreciate seeing a close up pic and
hearing   your description.  Thanks,  Jerry

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.