Subject: here's the 2 pics from eaa paul. tom klinedinst
From: ACRE NL
Date: 3/3/2003, 1:54 AM


 Dyke Delta JD-2
Lawrence O. La Beau
EAA# 421587
Las Cruces, NM
N207LL

The first of July 1996 I bought a set of plans for Dyke Delta S/N 1419

from designer John Dyke. The 29th of July 1996 I purchased the first
materials to construct N207LL. Construction continued until Feb 2002
when I pulled it as a trailer on its main gear (part of the design)
600 miles from San Antonio, Texas, to Las Cruces, New Mexico at 65
mph. From Apr 2002 to Feb 2003 construction continued in Las Cruces
until the final inspection 1 Feb 03 and airworthiness certificate
dated 7 Feb 03. In Texas and New Mexico I licensed it as a trailer
with some, "you can't do that" threats, unbelief, and help by fellow
EAA members. I'm planning for first flight before the end of February
03. It is also registered with the State of New Mexico.

Changes are a fuel
injected Mazda 13B with 2.17 gear reduction and a three bladed
electric adjustable Magnum composite prop. Ignition and fuel injection

is controlled by a dual programmable computer system. Mixture is
changed by a knob and indicated using O2 sensors and LED readouts of
air/fuel ratios.

I used G-10
fiberglass .047 x 4' x 8' sheets for the skins, gas spring to assist
gear retraction, stainless steel wing rib caps and bracing, and an
internal aluminum fuel tank. Performance is expected to be about the
same as with an O-360 Lycoming. The Mazda runs very smooth compared to

four banger's and makes static RPM.

This is my first finished homebuilt. In 1965 I recovered a Mooney Mite

and flew it around the Seattle area before selling it. I started a
Davis DA-3 in 1972 and sold the airframe, could not afford to buy an
engine. In 1992 bought a 1964 Mooney D with retractable gear and no
PC. Flew it to Alaska and above the artic circle and back to San
Antonio in 58 hours. Fairbanks at the end of June was 95 degrees for
two days without the humidity of San Antonio.

************************************************************************
***********

Thanks Tom. Sounds like Tracy's EFI system and a Ross or Tracy's gear
box.

The pics did not come across

When one sees a picture on a web site one wants to capture, one can
right click
the mouse button, scroll down and choose "Save As". Choose a folder on
their
hard disk and save the picture. It should be a gif or jpg. Then one can
email them to us.

There is certain html code on certain web sites that
don't allow this. If that is the case on the EAA web site more evidence
they are not worth joining.

I might pop over there and interview him. Perhaps Chuck Dunlap could do
it for us as he is half way there from here. Do you have a digital
camera Chuck? Heck a cheap card board box camera would work.
Send me the cardboard camera and I'll pop for
picture development. Kelly, do you have his email address?

If I had known about it I would have stopped in on the way to S&F last
year in the 182. Not planning on going by 182 this year.

BTW it will be interesting to see how that IVO Magnum prop works :)

Paul Lamar


I have a Mavica, if we can get contact info, I can go over there on a
weekend.
BTW a neighbor here lost his electric Ivo prop from a Lyco powered
Glasair, fortunately on downwind, no problem. The whole prop came off
due to loose bolts if I heard correctly.
Two nearby Rotaries hatched in two months, how exciting!!

Chuck

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.