Jerry Hey wrote:

 Here are a few photos showing progress to date.   This is pretty
close
 to the final position but the back end will have to lifted about
1/4
 inch to be exactly level.  The louvers in the photo are open to 35
 degrees but  I can open them to 70 degrees if necessary.  That
would
 entail welding extensions on the side pieces which I now want to do
 anyway for cosmetic reasons.   No problem as they are .063 6061.
 Operation of the louvers is silky smooth.

Jerry, When you send these from a Mac make sure they have the .jpg
file
extension. One was too dark.

Paul Lamar

   What size is that radiator?
  Ken Welter

The rad is a Scirocco drag race built by Griffin.  I bought it from
Summit.    It is a double pass design.  The core is 13 x 18 x 2.5 =
585 cu in.  Overall is 13 x 22.   Jerry

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.