>        Very interesting Bulent. That is the same reasoning I am using

for my

    >  radiators(one each side)which will be inside the wing strakes behind

the

    >  firewall of my Dyke Delta project. I am using NACA report information

that

    >  involved radiators buried in wings. The report has test results for

many

    >  shapes and sizes of inlets and outlets as to which are most efficient.

The

    >  inlets are on the bottom side of leading edge of the airfoil. The inles

are

    >  most efficient at climb angle of attack and slightly less

efficient(also

    >  lower drag) at cruise.
    >
    >       Kelly Troyer

Holger Stephan wrote:

Kelly, which NACA reports did you use? Are they among those you can
download for free?

Thanks

- Holger

       Holger here is the address for this report:

       <http://naca.larc.nasa.gov/reports/1942/naca-report-743/>

       Kelly Troyer

Two things Kelly. Those configurations are pre K&M (1942) and assume a non swept
back leading edge so be prepared for less than optimum performance.
In fact the air could just decide to go sideways instead of in the
scoop and through the rad. The Dyke Delta has highly swept back leading edges.

Don't shoot me. I am just the messenger :)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.