Hi, fellow rotary enthusiasts....I sent my Ross PSRU to Dave Mix for him

to do the modification to

add the thrust bearing. He needs to know the thickness of the gasket

that goes between the Ross

bellhousing casting and the smaller casting that holds the planetary

gears (with the 12 allan head

capscrews).  Mine didn't have a gasket when I took it apart. Should

there be one?  If so, what

thickness might it be, or do you just use silicone sealant? Thanks so

much for your information

and replies.  Paul Conner

Paul
No gasket.
 See Ed's problems. Make sure the gears mesh full length, mine didn't when I
received it from Ross.
Ian

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.