Subject: metric to A.N.
From: ACRE
Date: 3/11/2003, 8:15 AM


Jerry Hey wrote:

Can anyone tell me what the metric threads are for the two fittings
where the oil cooler plugs in. The two ports have different size
openings.   I want to buy metric to A.N. fittings.  Also,  for these
oil lines is -8  the recommended size?   I am installing Setrabs
which
can be ordered with  -6, -8 or -10 A.N. fittings.  Thanks,  Jerry

I have the information.  The respective sizes are 16mm. and 18mm.  The
recommended hose size is dash 10. Racing Beat sells fittings to adapt
the engine  to dash-10 A.N. hose.   I am ordering two Setrabs tomorrow
after talking to the Setrab tech.  According to C & R Racing, the
Setrabs will prove to be about 25 percent more efficient than the
stock Mazda oil cooler. One might be able to go smaller with the
Setrabs.     HOWEVER,  that someone will not be me. The stock cooler
has a core volume of 175.5 cu in.  The two that I am going to order
total 176 cu in.   These will be mounted as cheek rads, one inside
each inlet.

BTW,  I want to mention the extraordinary customer service at C & R
Racing.  Today when I called with this problem,  Stu at C & R
volunteered to call  a friend who is involved with racing Mazdas to get
the right information.  Ten minutes later he called  me back, long
distance, and  told me what I needed and where to find it.  Then he
gave me a contact to call at Setrab to discuss my particular
installation.   I am not surprised to get this kind of service from
them.  It is s.o.p.   Tomorrow C & R will get my order.    Jerry

Hi, Jerry.....glad to hear you received such good service from C & R. Can
you tell us what the cost of the Setrab coolers you are ordering? Thanks in
advance for your reply.  Paul Conner

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.