Subject: Direct drive pusher cooling fan.
From: ACRE
Date: 3/13/2003, 12:00 PM


Would it majorly screw things up to put a stator and rotor inside outlet of a pusher cowl with the
rotor direct drive from the spinner flowguide? (Klaus type). This would be somewhere back nearly
to the redrive plate.
Purpose being to augment flow through the cowl and coolers.
...Chrissi

Not very effective. BMW did that on their air cooled radials in W.W.II.
the big difference was the BMW fan did not run at prop speed. It was geared up.

Might work if you use a lot of camber, angle of attack, real long cord 
airfoils and a VERY close fitting shroud. Then of course it will
suck power and increase fuel burn all of the time.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.