Subject: LAEV Ready to Screw
From: ACRE
Date: 3/17/2003, 10:00 PM


Hi Paul/Guys;

In between a mess of a project I've been involved in, (which I'm
literally
locked up for).........I Finally got the LAEV set to
go!!!.........I'll
be
bringing it to S-N-F so those of you attending can see it, feel it,
smell it
etc. in person.......Unfortunately I won't be able to stay the whole
week since
I have to be back in the closet in a few days. I'll post later in
the
week what
my schedule will be.........If Paul can arrange for us to have the
Rotary tent
during off hours, I'll demonstrate dis-assemble and re-assemble of
the
LAEV for
those interested in seeing this and it's innards.

Here's a few preview shots:

002---Blade plan form
005---LAEV at minimum pitch setting
007---Minimum blade angle
008---Maximum blade angle (Gasp!!)


Great work Butch, Perry and Paul

    Can't wait to see it in real life.  Looks so slim and efficient
compared
to others.  Do we have any numerical values (Pitch?) to go with the min
and
max blade setting?  Is it ready to mount or does the electrical
strip/brush
part still need work?

    Be nice to mount it on my PSRU and fly back to NC with it {:>).

Ed Anderson

We would love to have you do that Ed. Are you prepared to sign a release
:)
We can stop over at Tracy's and install it.

Paul Lamar


I tell you what, Paul,  I would be willing to take off my prop and install
it for some test run ups.  Then assuming all looked well to everyone
involved (with me retaining veto rights {:>)) I could take it for a gentle
flight to keep gyroscopic loads to a minimum.   And yes, I'd sign a release.

Ed

Sounds good Ed. Keep the aerobatics down until we get a chance to
do the torture test. What do you think Butch and Perry?
With the variable pitch installed we can run it up on the ground to 
6000 or more engine RPM.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.