Weight is an advantage in a locomotive. Allows them to pull more.
Don't hold your breath on hydrogen distribution.
Paul Lamar
Newbie here - My biggest concern with hydrogen is containment.
Practical
quantities require liquification, which means cryogenics or high
pressure.
(What is the pressure of liquid H at room temperature? I can't
remember.)
Cryogenics calls for a huge thermos bottle. Not something I want to
be
within a hundred feet of in an accident.
Shannon
Hydrogen can be distilled or catalyzed from just about anything, natural
gas, gasoline, water, etc. In fact, it has been proposed the same gas
station pumps (with packaged mods) can be used to distribute hydrogen
distilled from natural gas piped to most gas stations for their heating
units! You could, in fact, gas up your hydrogen car at your house from a
small unit that converts the natural gas. All this is an intermediate
step until widespread hydrogen is directly available. It is a wonderful
idea, but who knows if the catalyst problem (which has already been
surmounted by encasing the hydrogen molecules in a matrix in tanks-which
have been tested to be far stronger than a gas tank, and LESS dangerous)
will be worked out. The hydrogen is not carried as a gas, nor at
cryogenic temps. If you educate yourself about this source you might be
a bit amazed it has not been conquered before (not necessary?). Then we
can tell the middle eastern mullahs to go to hell and mate with virgins
there.
[Marc Wiese]
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.