kevin lane wrote:

I got a little overzealous on the sander and need to get some new

injector sockets.  If someone

has some they aren't going to use I'd love to buy them.  They

appear to

be about 21/32" dia,

9/16ths deep with a 1/2" hole, came from a three rotor turbo

originally.

I need one for sure ,

but would like two  of them.   kevin   portland or

Hi Kevin,

I turned up four of these for Brian Trubee. (Sorry I don't have any

more

6063 bar stock).Measure them with your calipers set to metric. It is

a

metric engine. Very simple part to turn if you have a friend with a

lathe.

Mark Wrathall

I've got two left, I only used two, they are yours if'n you want them.

The only stipulation is

that you have to to a  favor for someone else on this list in the future

when you can.

Brian Trubee

kevin lane wrote:

I knew there would be some out there.  They didn't print the photo I
included of the socket.  I will be glad to help someone else out.  I am
currently the editor of the HomeWing newsletter, so am putting a good 30hrs
a month into the publication.  please send me your mailing address and I'll
send you some postage money.
kevin lane
102 ne 53rd ave
portland or 97213
(503) 233-1818

We printed it. Here it is again. What is the Homewing newsletter? Please send
me a copy.

830 East Santa Maria St.
Suite 303
Santa Paula CA

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.