kevin lane wrote:

I got a little overzealous on the sander and need to get some new

injector sockets.  If someone

has some they aren't going to use I'd love to buy them.  They appear to

be about 21/32" dia,

9/16ths deep with a 1/2" hole, came from a three rotor turbo originally.

I need one for sure ,

but would like two  of them.   kevin   portland or

Hi Kevin,

I turned up four of these for Brian Trubee. (Sorry I don't have any more
6063 bar stock).Measure them with your calipers set to metric. It is a
metric engine. Very simple part to turn if you have a friend with a lathe.

Mark Wrathall

I've got two left, I only used two, they are yours if'n you want them. The only stipulation is
that you have to to a  favor for someone else on this list in the future when you can.
Brian Trubee

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.