Ed Anderson wrote:

Ok, Perry

    I found a diagram with how pitch is measured.  It looks like its
measured from a surface parallel to the face of the propeller to the chord
of the blade at each station point.  I will take those measurements at 3"
stations out from the hub center line.

Ed Anderson
Matthews, NC
RV-6A N494BW
eanderson@carolina.rr.com

Come to think of it Ed. Just moving the stick back and fourth
while the tail is tied to a tree with the long rope and full 
engine RPM will bob the nose up and down.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.