Subject: cheap rotor housings source
From: ACRE
Date: 3/23/2003, 1:50 AM



Walter Williams wrote:

hi all,   i have been searching my letters
for hours and cannot find
the
one i need.  it was a
fellow, in texas i think, who knew a
company that was trying to
recondition rotor housings.  i
tore down 3 late model 13bs and did not
salvage a single rotor
housing i
would care to install in
an aircraft engine.  can any one help. i
would buy new ones if the
price
was reasonable.
HELP!!!!!          thanks walt.    single
rotor in wyo.


Brett & Tiana Campbell wrote:

Hey Walter, try Adam at Rx7 Specialties in
Calgary, Alberta, Canada.
Phone #
is (403)246-6980. I believe he gets his
housings straight from Japan for
a
very good price. Not sure what he sells them
for, but it won't be
anywhere
near what Mazda charges. Usually they end up
being part of one of the
rebuilts that he sells since he only uses new
housings for this purpose,
but
I'm sure he'd be glad to sell you a couple.

Adam is good. He also can get good prices on Mazda
factory parts and is
quite a bit less than our local dealer. He is also
the guy our dealer sends
engines to for their rebuilds.

John


--james coffman wrote:

Hello, I am also looking for rotor housings and and
have found 2 good NA housings and wondering if they
can be made into turbo housings by removing the
difusors? (sp} If so, how? Thanks Jim Coffman


I think you need to do that with a grinder. As I understand it
those inserts are tough! I could be wrong. I have never done it.

Paul Lamar

-"Brian D. Cain" wrote:

Yes, they can be "converted" to turbo rotor housings by removing the
exhaust sleeve.  You can swap a turbo one in no problem.

What you have to do is use a slide hammer w/ a phillips' head screw
(self-tapping), get it to make threads in the two pins on either side of the
sleeve holding it in, then pop them out.  That's the only tricky part to it.

B- 

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.