The $64k question is what is the peak acceleration at the CG of the
plane
during a hard landing? And what constitutes a hard landing? For
landing
gear, Part 23 says to find limit design loads, you can assume a downward
velocity at most 10fps or 6.8mph upon landing. Or, you could free drop
a
plane on gear from a max height of 18.7 inches.
kevin lane wrote:
when I worked at McDonnell-Douglas I would watch the tests for the F-18
landing gear. They removed the wings but added the weight back on. This
fuselage was then dropped something like 16' to simulate worst case carrier
landings. Remember that this plane weighed in at 38,000lbs. Then they
lifted it up again and again until something finally broke. totally
irrelevant to this discussion i realize.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.