Guys, I want to interject someting here. Vance can tell you this as

well. Solly the gent who

purchased Kis and Pulsar had a crash caused by exactly what this thread

is talking about. He

plumbed the return into one of his wing tanks on his new Super Pulsar.

He went up to fly with both

tanks about 1/2 full. The flight was only to be about 15 minutes "around

the patch". Due to the

volume of fuel transfered he ran one tank dry, ON FINAL! He wasn't able

to switch tanks, (if he

even though to). He didn't quite make the runway and crunched his new

plane up. He was unhurt

fortunatly.  While this is certainly pilot error casued by lack of

understanding of how much fuel

was recirculated, the point is it could happen to you. Get one of the

andair or similar fuel

switching systems that plumb the fuel back to the tank being drawn from.

The possibility to over

look the fuel transfer is simply to much to risk. The frequent pilot

might remember to switch but

someone coming back from some time off is the most likely to forget, and

the least likely to

recover from a problem. Best to avoid this solvable problem. Bill Jepson

I second that motion Bill. The Andair is expensive but well worth it in my
estimation.

Paul Lamar

Just go back into a header tank, what can go wrong with that ? It is the
simplest, lightest and most fool proof system.

John

We are worrried about heat build up John.

Paul Lamar.
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.