Barry Gardner wrote:
Paul, my plane (Aerocanard, like a Cozy) has spec'ed in a 3.5 gal sump tank.
I think we all agree that a one gallon sump tank is likely to have a heat
build up problem. But what about something as big as 3.5 gallons? Do we have
anyone with experience in that size range?
Paul Lamar responded:
I don't think so. As long as you don't run it down to just a gallon
or two I don't think you would have a problem but you never know.
I would guess the material the tank is made from has a lot to do
with it. An aluminum tank with a few cooling fins might be optimum.
The fuel leaving the fuel rail via the pressure regulator is going to be the
warmest. It mixes with incoming fuel in the sump tank, lowering the temperature,
making it harder to get rid of (remember that a cooling system's effectiveness is
a function of the delta T). The most effective would probably a small fuel cooler
between the pressure regulator and the sump. Of course the additional components
and interconnections are detrimental to reliability.
Russell Kent
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.