Subject: Second batch intake manifolds and water pumps.
From: ACRE
Date: 3/27/2003, 4:55 PM

The water pump castings are done and in the heat treat.
They are in the process of casting the intake manifolds.
I may not have time to get them machined before I leave
for Sun n Fun on Tuesday morning. In any event I will
bring a couple of raw castings with me to Sun N Fun.

I attended Westec yesterday. Westec is a huge NC machine tool
show at the LA convention center. The most significant development
to my way of thinking is the rapid drop in NC mill prices.

There are at least half a dozen machines under $20,000.
this will force down used prices and allow some of us
to build high quality NC machined engine  and other 
parts for less cost.  Even Hass and Fadal have 
introductory machines under $20K.

I also had a long talk with the guys at Extrude Hone.
They know the rotary and Abel Ibbarra well.
I'll take some injector runners and manifolds over there after
I get back from SnF. They promised to do some flow 
bench testing for me. I was surprised to learn that Ford was
using this process on a production line basis for
some of their high performance V6 engines.

If anybody wants to let me borrow a completely welded
up intake system I will see if I can get it Extrude Honed 
free of charge.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.