Thanks for the great report Brian. We learn more from our failures.
Any plans to use two piece or 3 mm apex seals in the rebuild?
Paul Lamar
-"Brian D. Cain" wrote:
Indeed we do, Paul. Half of my rotary life has been learning from
lousing things up, not paying closer attention, or just plain making
bad judgment calls. I'm glad none of them have been life-threatening
ones.
His engine is still using the 3-piece 2mm Mazda seals. We re-used
the old compression seals and springs because they only have about 2000
miles on them.
Speaking of 3mm, we did find a guy here local that's got a jig setup to cut
3mm grooves on rotors for about $250/pair. That's not all that bad. I can
forward contact information to you guys if you'd like (I doubt you guys
honestly need that, though).
B-
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.