Subject: Amazing water pumps - Funding
From: ACRE
Date: 4/8/2003, 10:01 PM


John Gibbons wrote:

Paul,

    It seems like less than a month ago we were posting about a custom
water pump for airborne
rotaries. This morning I open my e-mail and there is a picture of a box
full of cast housings. It
is remarkable what the power of the computer and internet can accomplish
when they are used
effectively. Thanks much for all you do.

John

Thanks John but speed can be a drawback. Especially when I screw up :)

Paul Lamar

Paul,
No ones laughing !! -  but what happenned ?
George (down under)

I used the wrong shrinkage factor. The computer can change the size of
the pattern in the blink of an eye.


Paul Lamar
------------------------------------------------------------------------------------------------

Paul,
You should not have to fund this stuff.  I, and I am sure many others, would like to send a small donation.  A donation of $20 to $50 from those of us building would help.  Is this enough?  Where do I send the check?

Ken P.

Money is not the problem Ken. Unless of course everybody sends enough to hire
a fabricator full time :) Time is my big problem.

We do accept donations to the Everett Hatch Memorial Prize fund.
A $500 prize was awarded to Tracy Crook for his 209 MPH accomplishment
in the Sun 100 race this past week. The fund is now down to about $500.

The speed bar is now official raised to 220 MPH for any rotary powered
airplane averaging that in a cross country race of at least 100 miles in length.
The prize will stay at $500.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.