The owner of one of the most prestigious aluminum foundries in
the US has been converted to a rotor head. I showed him a picture
of Tracy winning the Sun 100 race and he offered to develop
aluminum end housings at no cost to us. A good example of
the synergy between air racing and changing the hearts and
minds of untold thousands about the rotary.
He has the technology needed to embed low cost steel wear
surfaces in
the
aluminum end housings. He already makes thousands of
aluminum car wheel
centers with inserted steel parts that are welded to
steel rims. His
car wheels so designed and constructed have survived millions of
fatigue
cycles in industry standard wheel testing rigs.
He has also agreed to develop an aluminum three rotor intermediate
housing
which is a key to the continued availability of the three
rotor engine.
Anybody with an NC lathe can make three rotor eccentric shafts
but the three rotor intermediate housing is another
matter entirely.
We need to beg borrow or buy a three rotor intermediate
housing new or
used.
If you have one you are not using contact me.
Paul Lamar
If this really comes to pass, it is spectacular news. How
much weight
will be saved? I know it is significant amount. I will
schedule my
rebuild with first availability. Thanks Paul, Jerry
With the stock center housing weighing about 25 pounds we expect to
get that down to about 5 pounds. The rear housings weighs
about 35 to 40
pounds and that should be about 15 or so.
Paul Lamar
I'm not sure that you really mean that the center housing will only weigh 5 pounds, but if you do then we will be saving ~60 - 65 lbs, right at the front CG. Guess I will have to rebuild the engine mount (again!!) to move the engine 4 or 5 inches forward. Gonna be a LOT of crying over this development! But I would love to have this excuse to do all those CG calcs (guesses) again.
Ken Powell
All three are not going to happen over night. We want to do some durability and life testing
on this concept.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.