Subject: Aluminum end housings
From: ACRE
Date: 4/11/2003, 3:40 PM


Paul,
    I just recently joined your list and heard your news about aluminum end
and intermediate housing for the 20b. As part of my slow creep toward a
rotary powers aircraft I recently purchased an imported 20b from CNS Motors
to be sure I had one for when I final do start building.
It will not be used in the foreseeable future and I am willing to contribute
the housings for the manufacture of aluminum replacements. The engine is
still intact with all of it external accessories, in excellent shape, and
appears to be low mileage. Please contact me direct if you are interested.
Wade Bush
641-342-9030

The owner of one of the most prestigious aluminum foundries in
the US has been converted to a rotor head. I showed him a picture
of Tracy winning the Sun 100 race and he offered to develop
aluminum end housings at no cost to us. A good example of
the synergy between air racing and changing the hearts and
minds of untold thousands about the rotary.

He has the technology needed to embed low cost steel wear surfaces in
the
aluminum end housings. He already makes thousands of aluminum car wheel
centers with inserted steel parts that are welded to steel rims. His
car wheels so designed and constructed have survived millions of fatigue

cycles in industry standard wheel testing rigs.

He has also agreed to develop an aluminum three rotor intermediate
housing
which is a key to the continued availability of the three rotor engine.
Anybody with an NC lathe can make three rotor eccentric shafts
but the three rotor intermediate housing is another matter entirely.

We need to beg borrow or buy a three rotor intermediate housing new or
used.
If you have one you are not using contact me.

Paul Lamar

-"Webre, Steven P." wrote:

Damn.  This sounds like a MAJOR breakthrough.....

Good job!

Steve Webre
Broussard, LA

--wadebush wrote:

Paul,
    I just recently joined your list and heard your news about aluminum end
and intermediate housing for the 20b. As part of my slow creep toward a
rotary powers aircraft I recently purchased an imported 20b from CNS Motors
to be sure I had one for when I final do start building.
It will not be used in the foreseeable future and I am willing to contribute
the housings for the manufacture of aluminum replacements. The engine is
still intact with all of it external accessories, in excellent shape, and
appears to be low mileage. Please contact me direct if you are interested.
Wade Bush

I do not want to destroy a good housing Wade. That is what we will have to do to
make the necessary core boxes for the pattern. I am looking for one that is damaged
beyond repair or one that nobody needs and we can buy. If I were you I would
hold on tight as they may be in short supply very soon.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.