Subject: Aluminum end housings
From: ACRE
Date: 4/11/2003, 10:10 PM


He has the technology needed to embed low cost steel wear surfaces in
the
aluminum end housings.

<snip>
Paul, why do you want to embed a steel wear surface in the end housings?
Royce

-Royce Wise wrote:

Cut the weight. Why steel and not cast iron? Cheaper. Also steel can be hardened
using conventional low cost heat treating methods. No need for sacrificial cast iron
end housings as we are looking way down the road and high production.


How hard does the steel plate have to be hardened to achieve the same wear
characteristics as the stock housings, and Racing Beats aluminum housings?
Royce


My guess is around Rockwell C60. I don't know what RB uses for coatings.
I don't think it will ever be as hard as tungsten carbide but then
there is no possibility of it flaking off either.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.