Subject: Aluminum end housings
From: ACRE
Date: 4/12/2003, 10:55 PM


How hard does the steel plate have to be hardened to achieve the
same
wear
characteristics as the stock housings, and Racing Beats aluminum
housings?
Royce


My guess is around Rockwell C60. I don't know what RB uses for
coatings.
I don't think it will ever be as hard as tungsten carbide but then
there is no possibility of it flaking off either.

Paul Lamar


Paul,
Great !! but I'm a little confused.
Do you intend to use a carbon type steel  and heat treat it through to
Rockwell C 60 or a mild steel with a surface treatment.
George (down under).

Carbon chrome molly steel. 4130 or 4340. Heat treated.

Paul Lamar


We have cut about 6 engines into iddy biddy pieces to see how it is made,
how it
works, and how it can be hot rodded.
In doing all this we decided to abandon the idea of mixing two different
metals
for several reasons.
We now know how to mill two aluminum plates that get bolted together to
form
each housing.
No wear plate needed, and no problems of seperation or flaking.
Anyone with a "cc" mill and aluminum drops can make their own end
housings.
It's a simple process.
Royce

--Dan Ruggirello wrote:

Royce,
Can you provide more details, or is the process/design proprietary?  What
are your reasons not to use dissimilar metals - coefficient of thermal
expansion differences?

Dan 

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.