Subject: Apex Seals and NOX
From: ACRE
Date: 4/13/2003, 9:46 AM


Fred Osborn wrote:

 Question: If I plan on adding a nitrous oxide capability for
 short field takeoff would it be wise to go to 3mm apex
 seals. Does the NOX increase the probability of knocking.

 Fred O


Ken should be able to answer that.

Paul Lamar


   I have several hundred hrs on the 2mm three piece seals but
switched to the 3mm two piece seals and would highly suggest them.

  As for detonation yes it does increase the chance, to eliminate
detonation I have a relay that kills the trailing ignition as it is
near impossible to detonate with the trailing ignition off, also I use
MSD ignition and I use their 8980 timing computer to retard the
leading ignition.
  With this timing computer I can also retard the timing in flight on
long hard climb outs with a dial that runs from 0 to 12 degrees.

  Ken Welter

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.