kevin lane wrote:

Dan - would you help me in the initial design of my belly scoop?

looks

like you have some slick

software.  kevin  3 rotor turbo rv-8

 > Dan - please excuse my prior misspelling of your last name.  kevin

Dan Ruggirello wrote:

Kevin,
I don't mind running any profiles you have in mind - it may take awhile

to

get to though since I am getting a bit behind on other commitments.

Also, I

have to limit myself to 2D since I don't have the time or the computing
power to run any 3D.  It would really help alot if you can supply a

profile

to scale in IGES or DXF format but a sketch will do in a pinch.

Dan--

kevin lane wrote:

Dan - I'd write you offline but don't have your address.  the only design
software I have is what comes with PDQ airplane designer, a condensed
AutoCAD I believe. I haven't really used it too much.   it's funny, I used
to be on an graphics exchange team at McDonnell-Douglas back when IGES was
first being defined.  I preferred ANSI stds. actually, but the IGES politics
reigned, just like beta vs. VHS.
    I hope its OK with you, I've run a couple of your graphics in the Home
Wing newsletter.  I try to always include some alternative engine stuff for
the unwashed majority of Lycoming users.
    please send me your mailing address   kevin  N3773@attbi.com

Kevin, Stuff you got on here is copyrighted so I hope you gave us credit.
Send me a free subscription to the Home Wing newsletter.

Paul Lamar
830 East Santa Maria st.
Suite 303
Santa Paula CA
93060


The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.