Subject: Aluminum end housings
From: ACRE
Date: 4/14/2003, 9:14 AM


Just a thought, they are using ceramic coating on the
tops of pistons and
cylinders why couldn't the same be done on the housings.

Richard, you answered your own question when you mentioned the piston "tops". The ceramic is used as an insulator to allow higher heat. The piston does not run on that surface. Cylinders are not coated with ceramic, usually some type moly based lube. There are some plasma sprayed cermet coatings that are more than hard enough but flaking and separation from the substrate are the bigest problems. Bill Jepson

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.